The War Sword by Paul Chen is a hand-and-a-half design from the early 14th century. The hardwood grip and elongated scent-stopper pommel make the 32” blade surprisingly easy to handle. Key Features: Forged High-Carbon Blade Scabbard included Peened Pommel Overall: 40 1/2" Blade Length: 32 1/2" Handle Length: 8" Weight: 2lb 12oz Blade Steel: 1566 Specs will vary slightly from piece to piece.

The Paul Chen single-hand Damascus Steel Marshall Sword from Hanwei sets new standards of quality and authenticity in broadsword construction. The sword is based on an original, now in a British museum, used by one of England’s finest knights, Sir William Marshall, who served the crown faithfully under Henry II, Richard the Lionheart and Jack Lackland. This sword features a forged - folded Swedish powder steel blade with excellent handling characteristics. Tempered to a tough HRC 54, the blade section features a central ridged fuller and full-length distal taper - a tough test for the bladesmith but resulting in a superb combination of speed and strength. The grip is leather wrapped and laced and the guard and pommel are elegant in their functional simplicity. The scabbard is leather-covered with steel mounts. Truly a sword for the connoisseur. Key Features: Hand Folded Damascus Steel Blade Excellent Balance Fully Functional with Historical Construction Overall: 40" Blade Length: 33 1/4" Handle Length: 6 3/4" Weight: 3lb 1oz Point of Balance: 6" Point of Harmonics: 23" Width at Guard: 1.83" Width at Tip: .91" Thickness at Guard: .22" Thickness at Tip: .18" Blade Steel: K120C Specs will vary slightly from piece to piece.

Shi Samurai Sword from Frenchie Jian and the Dragon King Forge Blackest of the black and deadlier than death, the Shi Katana epitomizes the true function of the katana when carried to its ultimate end. When traditionally worn, the flash of the black skull shaped tsuba (guard) and kanji embossed fuchi-kashira (pommel) warns any would-be assassin that to challenge this warrior is to court your demise. The 11 ½” tsuka (handle) features a black-on-black tsuka-ito (handle wrap) and same (ray skin) handle contrasted by the triple silver skull menuki. A silver habaki (blade collar) and seppa (spacers) accent the 28” forged steel blade which rests in a hand carved, textured matte black saya. The saya is adorned with a buffalo horn kurikata (knob) and black sageo (cord). Powerful, foreboding and deadly sharp, the Shi Katana possesses a thirsty blade and its owner must be one who can harness the power wisely . Key Features: 28" T10 Forged Steel Blade Black-on-back tsuka-ito and same Skull shaped tsuba Overall: 41"" Blade Length: 28 Handle Length: 11 1/2" Weight: 2 lbs 12 oz Sori: 7/8" Blade Steel: T10 Specs will vary slightly from piece to piece.

The Savior Katana by Dragon King embodies the power of the Kami (guardian spirit) throughout the entire motif. From the fuchi-kashira, menuki, fuchia and to the tsuba, our artisans convey this ancient theme beautifully without being gaudy or pretentious. The silver sword menuki compliments the white same (ray skin) and black cotton tsuka-ito (handle wrap) and the notched silver seppa (spacers). The forged T10 steel blade features true clay-tempering that produces a distinctive hamon (temper line). The traditional polish brings out the real hamon and a mirror shinogi-ji (flat section). The HRC 60 edge and HRC 40 back are ideal for cutting if you wish to put it to the test. The blade rests in a deep blue saya (scabbard) with a buffalo horn kurikata (knob) contrasted by the white, yellow and blue sageo (cord). When you grip the Savior Katana in your hands, you become one with the musubi as the katana becomes an extension of your soul. Key Features: 29 1/2" forged steel blade Tradition handle construction Beautiful kami motif Overall: 43" Blade Length: 29 1/2" Handle Length: 12 1/4" Weight: 2 lbs 11 oz Sori: 1 1/8" Specs will vary slightly from piece to piece.

3.88" (9.86cm) closed. Mirror finish T10 High-Speed Tool Steel Hawkbill and pen blade(s). Denim micarta handle. Nickel silver bolster(s).

3.88" (9.86cm) closed. 2.88" (7.32cm) satin finish stainless Wharncliffe blade. Denim micarta handle. Stainless bolster(s). Lanyard hole.

6" (15.24cm) overall. 5" (12.7cm) carbon steel blade. One-piece construction. Twist pattern handle. Brown leather belt sheath. Weight: 0.92lbs Country of Origin: Pakistan

23" overall. 2" wide leather strop with stainless ring on one end and handle on the other.

The Generation 2/Legacy Arms Teutonic (German) War Axe - Designed by Bruce Brookhart is a German style axe capable of heavy blows to helms, shields and limbs. Sharpened tempered head is double pinned to a hardwood shaft with a tacked leather grip and steel butt cap. Key Features: high carbon blade hardwood shaft Overall: 27 1/2" Blade Length: 7" x 6" Weight: 3 lbs. 16 oz. Blade Steel: 5160 Specs will vary slightly from piece to piece.

Straight Razor. 6.25" closed. 2.75" stainless blade. Blue pick bone handle. Extended tang. Blade etching.

8 1/2" overall. 3.88" stainless elliptical blade. Offset rosewood handles for safe grip. Full tang. Lanyard. Leather belt sheath included. Weight: 0.6lbs Country of Origin: Canada

42" (106.68cm) overall. 34" (86.36cm) carbon steel blade. Brass handle. Steel scabbard. Weight: 7lbs Country of Origin: India

Closed: 6.25"; Blade: 2.75" Stainless | Standard Edge Handle: Green| Bon

36.75" (93.35cm) overall. 30" (76.2cm) satin finish carbon steel blade. Black leather wrapped handle. Brass guard and pommel. Black leather scabbard. Weight: 5lbs Country of Origin: India

4.5" closed. 3.25" black stonewash finish 8Cr13MoV stainless tanto blade. Black stonewash finish aluminum handle. Extended tang. Lanyard hole. Pocket clip. Thumb stud. Weight: 0.3lbs Country of Origin: China

Linerlock. Assisted opening. 5" closed. 3.5" gray titanium coated partially serrated 8Cr13MoV stainless tanto blade. Gray titanium finish stainless handle. Extended tang. Glass breaker. Lanyard hole. Thumb stud. Pocket clip. Weight: 0.5lbs Country of Origin: China

Dimensions: 11.75" x 11" x 0.75". Hardware included. Wood construction. Weight: 1.68lbs Country of Origin: China

Model Number: C907T-E Model Name: Elementum Overall Length: 6.99" / 177.6mm Width: 1.19'' / 30.3mm Overall Height(Include Clip): 0.66'' / 16.8mm Blade Length: 2.96" / 75.2mm Closed Length: 4.03" / 102.4mm Blade Thickness: 0.12" / 3mm Handle Thickness: 0.43" / 11mm Weight: 2.79oz / 78.98g Blade Material: D2 Blade Hardness: 58-60HRC Blade Grind: Flat Blade Finish: Black Stonewashed Blade Style: Tanto Handle Material: Micarta Handle Color/Finish: Green Liner Material: Stainless Steel Liner Color/Finish: Black Pocket Clip: Tip-Up,Right Carry Clip Material: Stainless Steel Screws Material: Stainless Steel Pivot Assembly: Caged Ceramic Ball Bearing Locking Mechanism: Liner Lock Designer: CIVIVI

Model Number: C907U Model Name: Elementum Overall Length: 6.99" / 177.6mm Blade Length: 2.96" / 75.2mm Closed Length: 4.03" / 102.4mm Blade Thickness: 0.12" / 3mm Handle Thickness: 0.43" / 11mm Weight: 2.74oz / 77.6g Blade Material: D2 Blade Hardness: 58-60HRC Blade Grind: Hollow Blade Finish: Black Stonewashed Handle Material: Cuibourtia Wood Handle Color/Finish: Wood Liner Material: Stainless Steel Liner Color/Finish: Black Pocket Clip: Tip-Up,Right Carry Clip Material: Stainless Steel Screws Material: Stainless Steel Pivot Assembly: Caged Ceramic Ball Bearing Locking Mechanism: Liner Lock Designer: CIVIVI

Model Number: C2024A Model Name: Riffle Overall Length: 7.98" / 202.7mm Blade Length: 3.46" / 88mm Closed Length: 4.52" / 114.7mm Blade Thickness: 0.12" / 3mm Handle Thickness: 0.47" / 12mm Weight: 3.38oz / 95.7g Blade Material: 14C28N Blade Hardness: 58-60HRC Blade Grind: Flat Blade Finish: Gray Stonewashed Handle Material: Micarta Handle Color/Finish: Brown Back Spacer Material: Micarta Back Spacer Color/Finish: Brown Liner Material: Stainless Steel Liner Color/Finish: Gray Pocket Clip: Tip-Up,L/R Clip Material: Stainless Steel Screws/Thumb Stud Material: Stainless Steel Pivot Assembly: Caged Ceramic Ball Bearing Locking Mechanism: Liner Lock Designer: CIVIVI

Model Number: C2009B Model Name: Fracture Overall Length: 7.74" / 196.7mm Blade Length: 3.35" / 85.2mm Closed Length: 4.39" / 111.5mm Blade Thickness: 0.10" / 2.5mm Handle Thickness: 0.39" / 9.9mm Weight: 2.98oz / 84.5g Blade Material: 8Cr14MoV Blade Hardness: 56-58HRC Blade Grind: Hollow Blade Finish: Gray Stonewashed Blade Style: Drop Point Handle Material: G10 Handle Color/Finish: Gray Back Spacer Material: Stainless Steel Back Spacer Color/Finish: Gray Liner Material: Stainless Steel Liner Color/Finish: Gray Pocket Clip: Tip-Up,L/R Clip Material: Stainless Steel Screws Material: Stainless Steel Pivot Assembly: Bronze Washers Locking Mechanism: Slip Joint Designer: CIVIVI

Model Number: C2015A Model Name: Appalachian Drifter Overall Length: 6.8" / 172.7mm Blade Length: 2.96" / 75.2mm Closed Length: 3.84" / 97.5mm Blade Thickness: 0.10" / 2.5mm Handle Thickness: 0.49" / 12.5mm Weight: 2.49oz / 70.6g Blade Material: CPM S35VN Blade Hardness: 59-61HRC Blade Grind: Hollow Blade Finish: Gray stonewashed Handle Material: Micarta Handle Color/Finish: Brown Back Spacer Material: Micarta Back Spacer Color/Finish: Brown Liner Material: Stainless Steel Liner Color/Finish: Gray Pocket Clip: Tip-Up,Right Carry Clip Material: Stainless Steel Screws Material: Stainless Steel Pivot Assembly: Caged Ceramic Ball Bearing Locking Mechanism: Double Detent Slip Joint Designer: CIVIVI

12" (30.48cm) overall. 7.25" (18.42cm) 440 stainless blade. Wenge wood handle. Full tang. Brown leather belt sheath. Weight: 1.1lbs Country of Origin: Pakistan

Ideal for the re-enactor crafting his own shield, our 14 gauge steel bosses are spun and then polished to remove the spinning marks before being pre-drilled for attachment to the shield. This 7-1/2" diameter version has a hemispherical cup. Diameter: 7-1/2". Weight: 1 lb.